The clothes have not been rinsed enough and there is detergent left on them or you have ironed a new item of clothing before washing it. Your iron has a built-in thermostat controlling the temperature very precisely over the entire surface of the soleplate. The thermostat dial contains international markers with dots corresponding to three ironing temperatures.

Steam: Some irons offer steam output, which means constant steam, whereas others offer steam shot which requires the user to push a button for an intense shot of steam to get rid of stubborn creases. This is all down to customer preference. Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature. Which water should I use? It has a generous 300ml water tank. The water level is quite visible, so you know when to top it up. The anti-drip function saves your clothes from water spots. The recharging operation on the base takes 10 seconds. How to better use my product What type of ironing board should I use?is standard for a handheld steam iron and proved more than adequate in my tests. Cordless models, as Teresa says, tend to be less powerful at 2400W. My best buy, the Tefal, is an impressive 3100W. What are the different types of steam irons? No stain risk: The clever anti-drip function safeguards against staining to keep your fabrics spotless. Your iron gets charged within 30 seconds and takes 7 seconds to recharge. You can control the temperature settings according to the fabric being pressed. The highest temperature level available is 220°C. No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).

In truth, this is probably the Azur’s most distinctive feature. If you’re worried you’ll never get round to cleaning and caring for your iron, it could well be the best one for you. An anti-drip feature will stop water from leaking onto your ironing. Some models also have anti-scale and anti-calc features, alongside a self-clean mode – all useful but not essential.

Use steam only when the iron is hot (the light must be off). What is the vertical steam function used for? How do I use it? There is not enough water in the tank. Fill it up with the quantity indicated in the instructions for use and push spray button several times to fill the system complete. The indicator light keeps going on and off. Key details – Size: 33.4 x 17.7 x 14.5cm; Power: 2,400W; Capacity: 350ml water tank; Water jug included: No; Continuous steam output: 30g/min; Weight: 1.39kg; Features: Ceramic soleplate, anti-scale, self-clean, charging lights, vertical steam, auto-off, variable steam, temperature-controlled steam Always use untreated water in your iron. If your water is very hard, we recommend you use a mix of 50% untreated tap water and 50% distilled water.

The vertical steaming feature allows you to iron hanging garments like curtains and even bedsheets. It emits 20g of steam per minute and utilizes 2400W of power. The steam is generated within 25 to 40 seconds. If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution. How to better use my product What type of ironing board should I use? Heat up time is just 30 seconds from cold, with an advertised recharge time of five seconds. although we noticed it did take slightly longer than this to recharge fully. It also stayed hot for longer than many of the other models, coming in second only to the JML.Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre. Various topics How do I prevent brown spots from the iron appearing on the clothing? The appliance uses 2400W power and takes just half a minute to get hot. The steam generation rate of the iron is 120g per minute, heating up in just 30 seconds. Durable results: The anti-scale system prevents limescale build-up to maintain long-lasting steam performance, ensuring you achieve effortless crease-free results, time and time again. Beldray’s big selling point, though, is the steam feature – this iron produces lots of steam. Although its continuous steam is only measured at 30g/min. which is plenty powerful enough in our opinion, the iron has a steam boost of 140g/min, making it extremely good for stubborn creases and wrinkles. Our only niggle? The iron was a little awkward to lift on and off the base, although this may well loosen up over time.

Moreover, this press includes a ceramic soleplate for smooth float overall textures, making your pressing chores soft and comfortable. Furthermore, It also offers a useful feature of a powerful steam boost of 130g to remove the most stubborn creases of different fabrics easily. Cleaning the anti-calc valve: Remove the antiscale valve and soak the valve in a cup of white vinegar or plain lemon juice for 4 hours. I want to remove the water from the tank but there is still a little left. This iron is best for immediate use as it gets hot for steaming in 25 to 30 seconds by using 2400W power.Sadly not a winner in this house As a family with young children our ironing pile is never ending, hence why I was so excited at receiving this iron. The iron itself is very sleek & light making it excellent to hold in your hand Using the burst mode can be utilised used when you need a massive amount of steam, and this product also features vertical steaming.