Diagbox-Lexia 3 Full Chip Diagnostic Scanner Lexia 3 Full Chip Diagnostic Tool Lexia 3 Full Chip Pp2000 Diagnostic Interface V7.83 Auto Diagnostic Tool For Peugeot Citroen

Product Information

Displays all stored and pending fault codes with complete descriptions (e.g. "Rail pressure - too low pressure"). The help messages on the automatic configuration Before/After screen (filter activated/deactivated) are no longer inverted if the parameters are modified.

Read Fault Codes :Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").Program supports report printing or copy to clipboard. Also, to speed up boot-time, Start>Control Panel>System>Automatic Updates(tab)>”Turn off Automatic Updates”

Lexia 3 PP2000 Diagnostic Tool Support Vehicles

Warning Diagbox only works as an administrator if you do not have a message telling you to reactivate Diagbox CITROEN MODELS : C-Zero / C1 / C2 / C3 / C3 PICASSO / DS3 / C-ELYSEE / C4 / C4 CACTUS / C4 PICASSO / DS4 / DS 5LS / C5 / DS5 / C6 / C8 / C-CROSSER / C4 AIRCROSS / NEMO / BERLINGO / JUMPY / JUMPER / AX / SAXO / BX / ZX / XSARA / XANTIA / XM / EVASION / C15 / FUKANGFUKANG 988 / ELYSEE / C-ELYSEE(R3) / C-TRIOMPHE / C-QUATRE. English, German, French, Japanese, Chinese, Russian, Arabic, Spanish, Turkish, Danish, Iranian, Greek, Hebrew, Hungarian, Indonesian, High-Quality Lexia-3 with original full chips. Double PCB has 7pcs optocouplers, 12pcs Relays make more stable(4.5V). Content includes: VMware 12 image with XP Pro SP3 32bit English and pre-activated Diagbox 8.55 (v07.855) Multilanguage; as well as VMware 12 image with XP Pro SP3 32bit English and pre-activated PP2000 V25 and Lexia3 V48 Multilanguage.

Our diagnostic interface Lexia 3 contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW). When i install the driverbox software, i meet the following prompt: error 0, Fallo de actication ( Activation failure) Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc… Deactivating the button « filter » displays all of the ECU’s parameters. In this case, the parameters which have been modified are displayed in red and in bold.

Detects all ECUs (electronic control units) installed in car 1996 – 2017, and reads all diagnostic fault codes 1996 – 2022. Part 1: VMware 12 image with XP Pro SP3 32bit English and pre-activated Diagbox 8.55 (v07.855) Multilanguage Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full

A1: Yes, it does, but which year of your Peugeot 308? Lexia-3 PP2000 works with Peugeot 308 from 1996 to 2008. Peugeot models: 106、107、205、206、207、306、307、308、309、405、406、407、408、508、605、607、806、807、1007、3008、4007、5008、ion、HOGGAR、RCZ、BIPPER、PARTNRT、EXPERT、BOXER etc.

Lexia 3 PP2000 Software

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 Correction concerning the customer mode forcing line displayed in red during a New Vehicle Preparation operation on several vehicles. Lexia3 compatible with Citroen cars including: C-CROSSER,NEMO,BERLINGO,JC1,C2,C3,C4,C6,C8,UMPY,JUMPER,AX,SAXO,BX and so on.