So the controller I have is Ruida RDC6442S-B(EC) I found one other thread talking about this but it didn’t seem to go anywhere. Smooth Motion Control: The Ruida controller’s advanced motion control algorithms ensure smooth and precise movements of the laser beam. This enables accurate positioning, intricate designs, and seamless curves in your laser projects. If we take a look at where these wires go to, you’ll see that some of these go to the motor driver X and the motor X, the driver Y and the motor Y.

Pre-burning Pulse width: when the laser is RF laser and need pre-burning pulse, you can configure the features of pre-burning pulse by pre-burning frequency and pre-burning pulse width. Push the “X+/-“ Keys to move the cursor in the numeral area, and push the “Y+/-” keys to change the value, then push the “Enter” key to save the change, push the “Esc” key to invalidate the change. Max/Min power keysCurrent work time: To forecast the running time of the current file (the current file No. is showed on the main interface), and the time is accurate to 1ms.

RDWorks is a software program used to create and control the operation of laser cutting and engraving machines. It is commonly used in the fields of woodworking, metalworking, and manufacturing to create custom designs and patterns on a variety of materials. The Ruida RDC6442S features a USB interface, which allows for easy transfer of data from a computer to the controller. It also has a dedicated DSP processor, which ensures that the laser head moves smoothly and accurately during the cutting and engraving process. Y Frame over size Work Paused - The design is too large or too close to the front or rear edge of the bed. Try centering the design on the bed or reducing the size of the design. Vector and Raster Processing: With support for both vector and raster processing, the Ruida controller allows for the execution of complex designs and graphics with precision and clarity. Whether you’re working on intricate vector-based shapes or detailed image engravings, the Ruida controller ensures outstanding results. If press “Udisk” entry in Figure 8.4-1, the system will show as Figure 8.4-3, and the operation method is the same as Figure 8.4-1.Turning Speed: the turning speed at closed-angle corner, the lowest speed in the whole cutting process. Turning Acceleration: the acceleration speed at the closed-angle corner when cutting. If the two speeds are set too large, vibration will be happened when turning; if set too low, it will influence the cutting speed. LaserCut is another popular software program that is compatible with Ruida controllers. It provides users with similar tools to RDWorks and supports a range of file formats, including AI, DXF, and BMP.

On-board system encryption control, onboard parameter storage, and file storage capacity of up to 256M RDWorks supports a wide variety of file formats, including common image and vector formats such as JPG, PNG, DXF, and AI. Power-Off-Restart Delay: it can be set to be 0~3000ms. After the electricity grid power-off, the power supply of the system will be not dropped to 0V at once. There is a delay during the time. The delay value set here should basically consistent with the actual off-delay value. If the deviation of set value is larger, on the de-energizing for continuous engraving, either the figure processed for the second time is not closed with that before the cutoff, or it is coincided with that too much.

RDC6442G VS RDC6442S

Compatibility: RDWorks is compatible with a wide range of laser cutting and engraving machines, including those from Ruida, Trocen, and Starfire, as well as many other brands. All outputs are isolated through the optocoupler, and 500mA current for each, OC gate output, each can directly drive the 6V/24V relay, led lamp, buzzer etc.

Additional features: LightBurn includes additional features such as text and shape editing, image tracing, and support for multiple layers and variable data. RDWorks does not have these features. Now, the next two are exactly the same as each other. CN5 is the one that you’ll find used on your machine. X/Y/Z/U-axis limit inputs are compatible to 5V/12V/24V logic level inputs. X/Y/Z/U-axis Motor Driver Interface AXIS_X~AXIS_U Figure 8.5-1 Push “Enter” key or “Esc” key, the system will execute. Chapter 9 Manufacturer/User Parameters Details Manufacturer ParametersThe Ruida RDC6445S is a newer version of the RDC6445G and is considered an upgrade. The RDC6445S is likely to have new or improved features and performance compared to the RDC6445G. Advantage